Manufacturer
Michell Engineering Record Clamp
Zoom  Zoom
Michell Engineering Record ClampMichell Engineering Record ClampMichell Engineering Record ClampMichell Engineering Record Clamp

Michell Engineering Record Clamp

  (26 Reviews)
£50.00    
£41.67 Exc. VAT |  |
  

Michell Engineering Record Clamp

Black Delrin record clamp with anodised aluminium knob for use on GyroDec, TecnoDec, or third-party turntables.

Modern vinyl records are thin, flexible and often warped or bowed. As most records do not lie flat on the turntable platter, sound reproduction suffers due to undamped vinyl resonances caused by the stylus riding on an unsupported record. Records which are bowed downwards contact the platter at the outer edge but not in middle. Conversely, records that are warped or bowed upwards tend to rock on the platter. In these instances anti-skating compensation is less effective and record wear is increased substantially by the lateral or vertical see-saw motion of the tonearm/cartridge combination. 

The Michell Record Clamp solves the above problems by bringing the record into more intimate contact with the platter.

Weight 68.4g

Average Rating (26 Reviews):  
Write a Review and share your opinions!

Rating:  
Style, Function, & Value
19 June 2023  | 

I have a black and silver Clear Audio Concept turntable, which matches perfectly with this clamp. It did surprise me how much force I needed to apply to properly compress the foam disc and flatten the records. However, once done properly, it functions flawlessly. Clamps of similar style and quality can cost upwards of 100 pounds/euro, so I would not hesitate to recommend this excellent product to anyone.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
My reality
02 June 2023  | 

Took me a while to to get it in use.. a bit awkward… but I got there. Does it help with warping?…yes. Does it improve the sound?… well in my mind… yes… and looks great when spinning the records.
As usual, analogue seduction delivery, fabulous.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Best Record Clamp
26 May 2023  | 

In my opinion the best clamp for stabilizing and pressing down from records to the turntable,
especially as an original variant from Michell Engineering, also protects the turntable bearing due to the only small additional weight

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
Michell Engineering Record Clamp
21 November 2022  | 

Thanks for the nice product!

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Great product and delivery
16 September 2022  | 

Great product and fast delivery and good communication

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Well Worth The Money
14 June 2022  | 

Great product. Arrived quickly and was just as described. Easy to use with my Project Essential II turntable. Fits well and does a great job of clamping LPs in place. Noticing some small sound improvements with my older (and not so flat LPs) when using the clamp. Worth the price of admission. And great service from AS, as you'd expect.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
The best clamp available
09 April 2022  | 

After trying weights, this clamp is perfect and a must have for anyone with old warped records, my ‘loft’ collection is now playable. It’s really well made and worth the money, was delivered quickly, will be using analogue seduction again

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Rega clamp works as the standard one
06 April 2022  | 

The underside of the clamp has a raised portion at its periphery that pushes down on the outside of the label area to force the record down against the platter.

The "R" clamp is similar to the standard Michell clamp but has a shallower rim (slightly more than 1 mm) to accommodate short spindles and is therefore supplied without the felt washer which would add too much clearance for the collet to grab short spindles.

The Rega version does have enough difference between the outer rim and the rest of the clamp's bottom surface, including the collet, for it to work as expected, also for “bowl” or “dish” shaped records, BUT for them you need to add a washer and there is none supplied with the clamp. Since the clamp is shallower you need a thinner washer than the 3,5-4 mm washer supplied with the standard clamp.

How thick depends on if the platter (or mat) has a recess or not, I use three different felt and rubber washers between 1,5 and 3 mm thick to get the desired result, different records also might need different thicknesses and sometimes I use the washers in different combinations. Using rubber O-rings also works. Mind you, this is only needed if the record is "bowl" or "dish" shaped, that is - one side of the record has the label floating and the other side has the label firmly on the platter and the outer edge floating and wobbling in thin air. The first problem is easily solved with any type of clamp BUT the floating edge problem needs a washer under the label and a clamp with a protruding rim.

Using the clamp does "flatten" many records that otherwise would be to warped to play well, but it does not totally solve the problems if the warp is to big. The clamp also, at least to my ears, tighten the sound of most records, most noticeable in the bass region. But I also found that pressing down and tightening in excess can, again to my ears, “dampen” the sound slightly, making it a little bit less “clear”, like listening through a thin veil.

All in all, and used the right way it is a “must have”!

Micke

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Excellent Clamp
17 January 2022  | 

I have a Michel Syncro and this clamp fits perfectly even 180g thick LP's. It has the ability to flatten vinyl that has mishappen over the years. Also can affect the sound of the record, so again that is something for you to look out for as that will be a personal preference, takes a wee bit of the high notes.so sometimes can be a good thing. The clasp works very well and the speedy delivery from AnalogueSeduction an added bonus.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
Great value clamp
17 March 2021  | 

There are lots of record weights out there, but few clamps. I wanted the former as I cannot really see the point of the latter. The Michell is far cheaper than the Pro-ject Clamp-it so it got my money. I think that I can hear a difference with tighter bass but then again, I may just be kidding myself......

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Read all 26 customer reviews...

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction