• 9" Uni-Pivot Tonearm.
• Machined Aluminum.
• ​Machined Aluminum Platter.
• ​300 RPM Outbound Motor.
• ​Improved Isolation Feet.
• ​Screw-down Delrin Clamp.
• ​Made in the USA

Audiovector QR 3 Loudspeakers

SIMPLISTIC DESIGN WITH PROFESSIONAL PERORMANCE
The design goal of the QR series has always been to offer the most advanced technology in a perfectly finished and proportioned high-end package. The sound is big, bold and dynamic, yet subtle and detailed when required and an excellent solution for all types of music. The fascia plate is machined from a single piece of Aerospace Grade Aluminium. It has been precision machined, glass blasted, brushed and then anodized in an attractive Tungsten Titanium Grey. It features a rose gold-plated dispersion mesh, which works as an S-Stop filter. This new Audiovector drive unit has the ability to work like a perfect piston over several octaves of the frequency band without the distortion normally found in aluminium/diamond drive units. This means music sounds warm, precise and detailed, yet dynamic and musical.

Moon 110LP V2 Phono Preamplifier

Still popular even though from another era, vinyl records offer music lovers a particular sound and tangible support that is much appreciated. Crucial in the result of listening to a turntable, the phono preamplifier optimally adapts a turntable to the rest of the Hi-Fi system, by amplifying the signal coming from the cartridge. Whether for a beginner’s table or a high-performance table, there is a MOON phono preamplifier for all tastes. During assembly, our phono preamplifiers benefit from special care. They feature measured and hand-selected capacitors for reproduction with a more precise and natural frequency response.

Developed with award-winning technologies used in our more exotic phono preamplifiers, the MOON 110LP v2 represents another leap forward in sound quality and affordability.

Enjoy all of the MOON sonic characteristics available at a lower cost than ever; fast, tight, extended bass response, a natural open midrange, and airy extended high frequencies.  This is achieved through the combination of an improved power supply and an enhanced circuit layout. Another benefit is an increased input overload margin for trouble free use.

In a matter of just a few seconds, you can easily configure under the unit each of these four parameters: gain, curve, resistance and capacitance. As a result, replacing your cartridge will not render the MOON 110LP v2 obsolete.

• End-user adjustable impedance loading (47kΩ, 475Ω, 100Ω, 10Ω)
• End-user adjustable capacitance loading (0pF, 100pF, 330pF, 430pF)
• End-user adjustable gain settings for moving magnet and moving coil cartridges (40dB, 50dB, 54dB, 60dB, 66dB)
• End user selectable curve (IEC/RIAA)
• Four layer PCB tracings using pure copper for low impedance characteristics
• Inductive DC Filtering for a significantly lower noise floor
• Compact, rigid all-aluminum chassis with gold-plated RCA connectors
• Designed to be powered up at all times for optimal performance

Moon 250i Integrated Amplifier

POWER AND EMOTION

The MOON 250i Integrated Amplifier delivers power and emotion in an elegant package.

Versatile and intuitive
Versatile and intuitive to use, the 250i delivers a seductive musical performance and represents an outstanding value. Well respected and known for exceptional price-to-quality ratio, the 250i marries a classy appearance, true MOON-build quality and irreproachable sound quality without equal in its price class. Assembled to our exacting standards, it will deliver outstanding performance with the reliability that has made our products so well known and respected around the world.

KEY FEATURES

Of course, key features you’d expect in a MOON product are present such as SimLink™, RS-232 and IR ports for custom-install environments.

Nordost Blue Heaven Tonearm Cable - 1.5m RCA to RCA

The tiny signals generated by pick-up cartridges, especially modern moving-coils, can be between 500 and 5000 times smaller than the average output of a CD player. Such fragile signals demand purpose built, low-capacitance cables if the finest details and textures are to escape smearing and loss. Low capacitance is a central aim of Nordost's high-speed minimalist construction, but a tonearm lead demands more. The Blue Heaven Tonearm Cable delivers exactly the low-loss electrical characteristics required, combined with effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, allowing you to specify the exact topology required to liberate the musical performance locked in the grooves on your LP collection. Its position at the start of the signal chain, and the fragile nature of the signals it carries make it one of the most critical and impactful cables in your system. With the Blue Heaven Tonearm Cable, now there's an affordable way to hear what's really on your records.

Nordost Blue Heaven Mains Cable - 1.5m UK

When you listen to your system, you are actually listening, quite literally, to the AC mains supply, which makes the most important cables in your system the ones feeding power into the equipment. They are responsible for the raw material that gets turned into the sound you hear and as befits this critical function, Nordost employs FEP insulation and its high-speed, low-loss Micro Mono-Filament construction to deliver the best possible power source for your system.

The Blue Heaven Power Cord seems like a conventional, three-core AC cord, but don't be fooled. The use of Nordost's proven, proprietary high-speed, low-loss Micro Mono-Filament construction and FEP insulation throughout transforms its performance and the performance of your system. When it comes to your equipment's power supply, you need quality as well as quantity, and the Blue Heaven Power Cord delivers both, making it the crucial foundation on which to build your system's performance. It is available in a full range of AC plug options.

Nordost White Lightning Interconnects - 1.0m Pair

The White Lightning Analog Interconnect is a fully-shielded design that can be terminated for balanced or single-ended connection. It employs four, 26 AWG silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements. The Insulation is high-grade FEP, selected for its superior dielectric performance, while the elegant minimalism extends to the carefully selected low-mass connectors and differential grounding. Like all Nordost cables, the White Lightning Analog Interconnect is manufactured and hand-terminated in the USA, enabling us to further guarantee consistent performance. The result is a high-speed, low-loss interconnect that preserves the sense of musical power and momentum, creating a new performance benchmark at this price level.

Nordost White Lightning Speaker Cable - 3.0m Pair Banana to Banana

Nordost's original Flatline loudspeaker cable introduced the audio world to an entirely new level of performance and a unique production technique. Our proprietary, extruded FEP cables, with their thin, flat profile don't just look different - their deceptive simplicity is a uniquely elegant answer to the conflicting requirements for low resistance, capacitance and inductance that limit the performance of more conventional cable configurations. Now, by re-examining the geometry of each cable, we have reduced dielectric effects even further as well as optimized the physical spacing of the conductors. This results in significant musical gains, allowing White Lightning Speaker Cables to establish a completely new performance benchmark at this price point and deliver greater power and musical purpose from your system than you would have thought possible.

Be the first to Write a Review for this item!