SilentPower by iFi Audio Groundhog Earthing Cable Set
When you touched your device, did the hum/buzz noise increase? Well, in most cases, this is likely to be caused by a missing Ground/Earth connection that normally shields your system from such interference and drains away the noise.
Electrical safety and EMC Legislation require certain ways of designing AC power systems. This legislation does not consider audio systems and is mandatory. It can lead to the irritating issue of hum, buzz, hiss and general interference in certain systems where:
• The system includes at least one AC mains powered device or has an AC mains charger attached and it has no Ground/Earth at all
• The audio system has at least two AC mains powered devices which leads to more than one, multiple Ground/Earth connections.
If you have identified that you have a Missing/No Earth, then the Groundhog is for you. Its sole objective is to put the Ground/Earth back into your system and banish those unwanted, audio pests. No predicting the weather with this hog!
All you need to do use a standard IEC power cable to connect the Groundhog to your audio system. The Groundhog then adds back the missing Ground/Earth connection to dissipate noise.
Connections
Our Groundhog is multi-talented as it includes a variety of connections to suit just about any audio system.
- RCA base cable – for any audio system with an unused RCA socket.
- USB converter – for a computer audio system. Just connect to a spare USB port.
- Spade converter – for power supplies with a DC barrel connector.
- 3.5mm Y-converter – for portable devices with an unused 3.5mm connection.
As a result of connecting the Groundhog and adding back the Ground/Earth you will get increased resolution, a full-bodied mid-range, tighter bass and improved musicality and neutrality.
To put it simply, a much richer and fulfilling listening experience. No more annoying hum, buzz or hiss.
