Manufacturer
Pro-Ject Grease IT Turntable Lubricant
Zoom  Zoom

Pro-Ject Grease IT Turntable Lubricant

  (1 Review)
£14.95    
£12.46 Exc. VAT |  |

Project Grease IT Turntable Lubricant

How to use Grease it

A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubcricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.

We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.

Features

  • To be used with inverted bearings
  • Helps a smooth movement
  • Pre-filled syringe
  • Easy handling

Specifications

  • Amount 2.3 ml
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Perfect for my Pro-Ject Xtension 9 Evolution
24 November 2021  | 

Very satisfied overall! Product shipped rather quickly to Switzerland and it arrived in perfect condition. Application was easy following the simple instructions on the package.

But most of all, the results were better than expected: I'd be running my turntable (Xtension 9 Evolution) for several hundreds of hours (>1300) without ever renewing the lubrication since I purchased it in 2015. Lately, I had noticed to my amazement that when spinning, the platter was not perfectly perpendicular to the plinth!

After carefully cleaning the old oil off the bearing, I applied the "Grease It" and ...thankfully the platter was spinning level to the plinth again!

Definitely recommended to keep your turntable's bearing in a good shape!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction