Synergistic Research Atmosphere X Excite Phono Interconnect Cable

Synergistic Research Atmosphere X Excite Phono Interconnect Cable

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol. 

 

Atmosphere X began when we started exploring ways to improve our UEF Shielding by applying UEF Technology first developed for our BLUE Fuses to Atmosphere Series cables. By placing UEF Tech in a grid pattern on the shields of Atmosphere cables we were able to dramatically lower the noise floor with a surprising increase in musicality or the subjective enjoyment of music. We then began a painstaking double-blind 6-month trial where we would listen to seemingly identical cables marked with random alphanumeric codes to conceal differing patterns of UEF Tech inside each prototype cable and record which options elicited the strongest responses among a control group of listeners. By gauging actual emotional response, we were able to isolate grid patterns that better conveyed the essence of music. We would then build on these patterns to find additional patterns that performed better than the last. In this way, our latest shielding technology is highly evolved from anything we have ever done before with each shield pattern selected for its ability to not only lower a cable’s noise floor but to also convey a greater sense of musical enjoyment. The net result is the most advanced shielding technology we have ever developed with each model in the Atmosphere X Series gaining a special shielding pattern that best compliments the geometries of ALIVE, EXCITE and EUPHORIA.

 

 

2 each Tricon  4th Gen:

• Silver Matrix: Monocrystal conductors with a separate ground conductor from shield
• Dielectric: Teflon
• Shielding: Ground Plane Technology
• Listening tests performed for signal direction before build

2 each Silver Air String cables:

• Silver Air Strings: 99.9999% pure monocrystal silver conductor
• 4 separate conductors RCA / 4 separate conductors XLR
• Dielectric: Air (sealed)
• Shielding: UEF Ground Plane Technology
• Level 3 OTSP UEF Cell Filtration
• Hand crafted in our California factory

Geometry / Filter Count:

Each Pair of Euphoria Phono cables are actually 2 separate runs of Tricon 4th Gen cables plus 2 silver monofiliament conductors in air sealed dielectric  plus one UEF Level 3 OTSP 3-channel filter for ground, signal and shield for RCA or XLR interconnects.

RCA and XLR Connectors:

• Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

Build Notes:

• Euphoria Signal Matrix (proprietary)
• 44 (RCA) 54 (XLR) point-to-point hand soldered connections
• Individual EXP Isolated cable geometries for improved vibrational isolation
• Atmosphere Level 4 UEF Matrix Shielding: 2 different UEF coatings with Graphene are applied to UEF Cell, connectors, cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and UEF Cell also benefit from dampening effect that UEF provides
• 1 Termination for Atmosphere tuning Module (Red and Blue)
• Silver Solder: 4%
• Hand build time: 5.5 hours
• Quantum Tunneling: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
• Secondary UEF Blue Treatment originally developed for SR Blue Fuses
• 5-day Burn In: 2 step process
• Hand Made in our California factory