Manufacturer
Lyngdorf FR-1 Full Range On Wall Speaker (Single)
Zoom  Zoom
Lyngdorf FR-1 Full Range On Wall Speaker (Single)Lyngdorf FR-1 Full Range On Wall Speaker (Single)Lyngdorf FR-1 Full Range On Wall Speaker (Single)

Lyngdorf FR-1 Full Range On Wall Speaker (Single)

£899.00    
£749.17 Exc. VAT |  |
  

Lyngdorf FR-1 Full Range On Wall Speaker (Single)

Lyngdorf's FR-1 Full Range Audiophile Loudspeaker brings their compact speaker designs to a new level of performance with genuine musicality characterising Lyngdorf Audio.  Their focus on dynamic performance resulted in a closed cabinet design with a large slave unit, which suppress the internal resonance frequency and allows for deep bass from this elegant shallow cabinet.
 
Designed for wall mounting, the FR-1 is compact and solid, emphasising their focus on dynamic music reproduction without sacrificing natural timbre. The depth of the cabinet is reduced to a minimum to ensure discreet placement and to keep the drivers as close to the wall as possible for optimal coupling to the room.
 
With a new powerful 6.5″ driver and the added output from the slave unit, the FR-1 does not need the support of a subwoofer. The  driver is designed with a strong magnet and, together with the supporting 8″ slave unit, the low-frequency performance is unequalled in such a small cabinet. Voices are exceptionally open, and transients are tight and clean, which makes the FR-1 the optimal choice for an elegant home media installation.
 
If you want to enhance the performance further, the perfect match is a set of Lyngdorf BW-2 woofers. Thereby you can get even deeper bass and higher overall output. The speaker cones are made from aluminium, which is light and stiff and designed with a single well-defined breakup point that is easy to counteract in the internal filters. The textile soft dome design tweeter from the Lyngdorf MH-2 is redesigned to match the higher output, and the result is convincing with high sensitivity and an impressive soundstage.
 
With its clear and unstressed sound, the FR-1 calls for playing loud and all night. Not only is the tweeter protected by a PTC circuit, but the entire speaker is designed for high performance.
 
The temperature-resistant voice coil made from glass fibre and impregnated with a polyimide resin, together with a ventilated magnet and a copper cap, all minimise temperature build-up and distortion.

Highlights

  • TickSlim cabinet for optimal sound and placement
  • TickElegant and discreet design
  • TickNo need for a subwoofer
  • TickFor high performance all night
 
Power handling 100 W
Nominal impedance 4 Ohm
Tweeter Size: 1” | Textile soft dome | PTC protection
Midrange driver Size: 6.5” | 35mm voice coil | Cone material: aluminum | Die cast basket | Vented magnet
Slave uni Size: 8”
Enclosure Ported with slave | Full MDF construction | Volume: 13.5 litres
Frequency response 50 to 20,000 Hz (-3dB)
Maximum SPL 101 dB RMS full range | Pink noise | 107 dB Peak
Sensitivity 89 dB (2.87V/1m)
Crossover point 2.2 kHz
Connections Binding posts
Placement options Wall mount included | Prepared for alternative brackets (M4 bushings)
Dimensions (WxHxD) 34.0 x 57.0 x 11.5 cm
Weight 8.4 kg
Finish High gloss black or matte white

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction