Synergistic Research Galileo Discovery Analogue Interconnects

The Galileo Discovery interconnect geometry is a direct evolution of designs that date back to 1995, including Tesla Apex, Absolute Reference, and Designers’ Reference cable looms. We then applied brand-new technologies developed during the clean slate SRX state-of-the-art cable program for the most significant performance leap in Galileo’s ten-year history. Galileo Discovery starts with parallel geometries of 4th generation Tricon and Air Strings handmade in our California factory from 99.9999% Silver in an Air Dielectric. We then apply a brand new UEF Compound developed for the SRX cable loom and our new Purple Fuses to dramatically lower Galileo Discovery’s noise floor while expanding its sound staging capabilities to nearly that of the SRX cable loom. We then apply the SRX multi-frequency long duration conditioning process, which enhances resolution and musicality in equal measure. We have included our highest performance Carbon Fiber UEF Tuning Circuits first developed for the SRX cable loom to voice Galileo Discovery to your system. Gold UEF Tuning Circuit creates a detailed, liquid balance, while the Silver UEF Tuning Circuit has a more substantial low-frequency impact with pin-point clarity and frequency extension.

SRX Long Duration High Voltage Conditioning.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.

Redifining Refinement.

To voice Galileo Discovery power cords to your system, we recommend you allow the cable loom to settle for at least 72 hours without tuning circuits before voicing each power cord separately. Then, start as high up the signal chain as possible, listening to your two tuning options and selecting the variant that makes music before voicing the next Galileo Discovery cable down the line. And when voicing with Galileo Discovery interconnects and speaker cables, start with a Silver UEF circuit on your speaker cables without comparing Gold to Silver options. Next, compare Gold to Silver on the interconnect pair as high up the signal chain as possible and select the option that sounds best to you. Now, voice each interconnect option Gold vs. Siver down the line until you arrive at your speaker cables. You will then compare the existing Silver circuit to the Gold UEF Tuning Circuit to arrive at a bespoke match perfect for your system. Lastly, voice your power cords Gold vs. Silver one at a time until all power cords have been voiced. As a rule, you will find one color, Gold or Silver, to sound best in most applications but with a few exceptions where the opposite color is your best fit. In this way, you achieve a custom balance perfect for your system. And should your system change in the future, you can reassess your voicing options to create the ideal match for new speakers and components without reconsidering your cable loom.