MS HD Power E02SK V2 78K UK 6 Way Distribution Mains Block
MS HD Power MS-E02SK V2 78K Silver 6 Way UK Filtered Distribution Strip
Strip Blocks can help with the distribution of power and current within an audio system. MS HD Power have taken all this into consideration with E02-SK , the E02-SK has been 78K cryogenically treated with all ground wires and terminals going through the MS HD 78K procedure and together with Rhodium plated terminals, 4mm² silver plated internal wiring with silver rich soldering, silver plating IEC inlet this all helps improves transmission of current and voltage within the audio system. Also connecting the distribution block to the wall a 1.5m long Extra Large 3.0 µm 925 silver plated mains cable as not hamper this connection.
People would think of -196 degree Celsius when talking about cryogenic treatment. Celsius is normally used by observatory when describing weather temperature. Scientists use Kelvin (K) to represent temperature unit. Zero Kelvin means absolute zero of temperature, or -273 degree Celsius. Hence, -196 degree Celsius should be read as 77K, much simple and professional.
Why does MS HD POWER name their cryogenic technology as 78K rather than 77K? It is because their treatment technology is not using 77K temperature, they use a very special technology namely “78K Impassion Treatment Technology” to emphasise uniqueness.
Normal cryogenic treatment uses liquid nitrogen as treatment media. Cryogenic treatment can be divided into two types of method: wet type and dry type. Wet type makes the metal parts inside liquid phase nitrogen while wet type makes the metal parts inside vapour phase nitrogen. Liquid phase nitrogen treats metal parts rapidly but temperature control cannot be easily achieved. Vapour phase nitrogen treats metal parts slowly but temperature control can easily be controlled. Rapid decrease of temperature makes metal parts to have residual stress which affects the electric conductivity of metal parts. Slow and consistent decrease of temperature avoids residual stress in metal parts, hence increases electric conductivity of metal parts.
Deep cryogenic treatment does affect the arrangement of crystal structure inside metal parts in a rather small scale. That’s why MS HD POWER did not cryogenically treat their metal parts in the past time. In 2014, MS HD POWER put up a research on metal part treatment in associate with a deep cryogenic treatment expert in UK. They successfully achieved a unique method to increase electric conductivity of metal parts, “78K Impassion Treatment Technology”.
78K cryogenic treated.
External 78K cryogenic treated ground wire with rhodium plated terminals.
Upgraded power cable with 78K MS328 SK 13A UK power plug and MS9315 SK IEC connector.
Redesigned PRRT™ filtering technology to improve audio and video quality.
6 premium grade sockets with high spring rate phosphor bronze clips to assure tight connection.
3.0 µm pure 925 silver plating to all power clips and IEC inlet for purified signals transmission.
5mm² power transmission bus bars with 1.0 µm pure silver plating enhances high current flow.
4mm² silver plated 6N OFC internal wires with silver-rich soldering.
Type-C14 IEC inlet to adapt user-selected power cords.
72,000 Amp. surge suppression protects Hi Fi / AV appliances.
Super Heavy gauge metallic chassis with spikes for vibration absorption.
Rapid response resettable safety switch protects equipment connected.
Fully approved by BSI and complied with BS-1363 / A and BS-5733 / A standards.
SPECIFICATIONS
Number of Sockets: 6
Type of Outlets: UK Un-switched
Standard Mains Inlet: IEC C-14
Supplied with: 1.5m 78K Extra Large 3.0 µm 925 silver plated mains cable and 78K 1m ground wire
Mains Voltage: 200 ~ 240 VAC 50 / 60Hz
Maximum Current: 13amp
Total Wattage: 3120 ~ 6500 Watts @ 240volts
Dimensions: 11 x 41 x 9.2cm (W x L X H)
Weight: 2.6kg
