Synergistic Research Euphoria Level 3 Power Cable

£3,495.00

£2,912.50 Exc. VAT |

Length:

Description
Specifications
Customer Reviews (0)

Synergistic Research Euphoria Level 3 Power Cable

Atmosphere X Euphoria Power Cables are specifically designed to reduce all noise in your system including digital grunge by shunting it to ground inductively through a complex multi cable geometry and UEF Shielding and Active Shielding for the quietest power cord in the Atmosphere X lineup. All conductors, wall and IEC connectors, shields and the same Swiss-Made power supply found in our Galileo SX power cords are then treated with our amazing Blue Fuse treatment process, and this gives Atmosphere X Euphoria a lower noise floor than is possible from the more conventional power supply and geometries found in Excite. Additionally, Euphoria’s geometry gets a boost from one more pure Silver Air String for a sound that has increased air and finesse. Another trickle-down performance upgrade from Galileo SX is the inclusion of a Ground Plane encased in the carbon fiber tube. And there’s an option to ground Euphoria’s Swiss power supply and shileds to a Synergistic Research Active Ground Block, this is perhaps the most significant upgrade that dramatically reduces your system’s noise floor for increased dynamnics and emotional involvement in your music. As with Galileo SX custom tuning is achieved through the use of a Gold UEF Tuning Module that adds warmth and bloom or when not connected the cable has a leaner balance. Of course, the choice of whether or not to use the Gold Tuning Module is yours, giving you the option to custom tune the sound of Euphoria to complement your system.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.

3 each 12 awg. Copper Matrix Alloy:

Dielectric: Modified PE
Shielding: Braided Ground Plane Technology
Geometry: 2 channel

3 each Silver Air String:

Silver Air Strings: 99.9999% pure mono crystal silver conductor
4 separate conductors RCA / 8 separate conductors XLR
Dielectric: PTFE Air (sealed)
Shielding: Ground Plane Technology
Hand crafted in our California factory

1 each Active Shielding UEF Cell:

Modified Swiss-made DC bias Power Supply
UEF: Graphene treated pcb
SR Quantum Capacitors
Dielectric: PTFE
Shielding: Ground Plane Technology
Housing: Carbon Fiber Cylinder

1 each Red Active Module:

For lowest noise floor, completes Active bias circuit

1 each Gold UEF Tuning Passive Module:

Optional voicing for increased warmth, liquidity

Connectors:

Connector Input US: 1 each Synergistic Research G07 Pure Gold
Connector Input Int’l: 1 each Synergistic Research G07 Pure Gold Schuko
Connector Output US: Synergistic Research G07 Pure Gold IEC 15 amp and 20 amp connectors
Connector Output Int’l: Synergistic Research G07 Pure Gold IEC 15 amp and 20 amp connectors

Build Notes:

32 point-to-point hand soldered connections
Atmosphere Level 4 UEF Matrix Shielding: 2 different UEF coatings with Graphene are applied to UEF Cell, connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane and UEF Cell also benefit from dampening effect that UEF provides
1 Termination for Atmosphere Active Tuning Module (Red)
1 Termination for Atmosphere UEF Passive Tuning Module (Gold)
Silver Solder: 4%
Hand build time: 2.5 hours
Quantum Tunneling: Before the Active power supply is incorporated all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that lets electrons to flow more freely. This also allows the “Active Shielding” to work more efficiently yielding the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
Secondary UEF Blue Treatment originally developed for SR Blue Fuses
5 day Burn-in: 2 step process
Hand crafted in our California factory

Be the first to Write a Review for this item!