Connectivity
Video Inputs and Outputs:
- (6) HDMI 2.0b compliant HDMI video inputs (all with full support for 4k UHD video, HDCP 2.2, HDR10, HDR10+, and Dolby Vision).
- (2) HDMI 2.0b compliant HDMI video outputs (primary output supports both ARC and eARC).
Audio Inputs:
- (4) stereo unbalanced analog audio inputs.
- (2) S/PDIF coaxial digital audio inputs.
- (2) Toslink (optical) digital audio inputs.
- (1) USB Audio (DAC) input.
- (1) Bluetooth audio input (internal with rear panel antenna).
Audio Outputs:
- (1) set of 13.2 channel unbalanced audio main outputs.
- (1) set of 11 channel speaker outputs
- (2) balanced subwoofer outputs (in parallel with main sub outputs).
Other Inputs and Outputs:
- (1) IR remote control signal input.
- (1) RS-232 serial remote-control port
- (1) Trigger output (programmable).
- (1) USB data input (reserved for firmware updates).
Audio Formats and Modes Supported
Surround Sound Audio Formats:
- Dolby Atmos
- Dolby TrueHD
- Dolby Surround
- DTS:X
- DTS HD Master Audio
- DTS
Surround Sound Upmixers:
- Dolby Surround Upmixer (DSU)
- DTS Neural:X
Sound Field and Processing Options:
- Pure
- Direct
- Stereo
- Multi-Channel
- Dolby Upmix
- DTS Neural:X
Room Correction
Automatic Room Correction
- EmoQ Second Generation Automatic Room Correction (with graphical interface).
Manual Room Correction (EQ):
Three Separate Manual Speaker Presets - Each Of Which Offers...
- 11 Bands of Full Parametric EQ: Left Front and Right Front.
- 11 Bands of Full Parametric EQ: Center Channel.
- 7 Bands of Full Parametric EQ: Surround Channels.
- 7 Bands of Full Parametric EQ: Top Channels.
- 5 Bands of Full Parametric EQ: Subwoofers.
Technical Specifications
Line Level Analog Outputs (Preamp Outputs)
Rated Output Voltage:
+6 dBV (2 VRMS)
Frequency Response:
20 Hz to 20 kHz +/- 0.05 dB
Total Harmonic Distortion:
< 0.0025% @ 1 kHz
< 0.05% from 20 Hz to 20 kHz
Signal to Noise Ratio:
> 100 dB @ 1 kHZ
Crosstalk: < 85 dB @ 10 kHZ
Speaker Outputs (Amplifier Section)
Power Output Per Channel; ONE channel driven:
160 watts RMS / channel @ 8 Ohms; 290 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; TWO channels driven:
160 watts RMS / channel @ 8 Ohms; 260 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; FIVE channels driven:
135 watts RMS / channel @ 8 Ohms; 190 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; ELEVEN channels driven:
100 watts RMS / channel @ 8 Ohms; 130 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ 0 / - 0.15 dB) or better.
Broad Band Frequency Response:
5 Hz to 80 kHz (+ 0 / - 3 dB).
THD + Noise:
< 0.005% (A-weighted); at rated power; 1 kHz; 8 Ohms.
Signal To Noise Ratio (8 Ohm Load):
> 115 dB or better; referenced to rated power (A-weighted).
Minimum Load Impedance:
4 Ohms (one 4 Ohm speaker or two paralleled 8 Ohm speakers.)
Damping Factor:
> 500.
Environmental
Power Requirements:
- 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
Dimensions:
- 17” wide x 7-3/4” high x 15-1/2” deep (without connectors).
- 24" wide x 13" high x 23" deep.
Weight:
- 50 lbs. (net)
- 58 lbs. (boxed).
Downloads
Download Product Manual
Emo-Q™ Guide
Emotiva Processor Setup Resources
Emotiva Processor Compatibility, Configuration Notes
