Ortofon Synergy GM Moving Coil Cartridge
Please note this cartridge is a special order item. Please contact us for estimated delivery times.
The SPU Synergy GM modernises the classic SPU design with a number of optimisations designed for optimum compatibility and sonic purity.
This cartridge features a wood-based housing and has a revised generator system which allows for a maximum output of 500µV, relaxing the requirement for high gain transformer or active preamplification systems.
While still making use of a highly polished Nude Elliptical stylus, the stylus tip mass has been reduced significantly, resulting in reduced VTF and higher tracking ability.
TECHNICAL DATA:
| Output Voltage At 1000 Hz, 5cm/sec: | 500 µV |
| Channel Balance at 1 kHz: | <1.5dB |
| Channel Separation at 1 kHz: | > 23 dB |
| Channel Separation at 15 kHz: | > 15 dB |
| Frequency Range (At - 3dB): | 20 - 30.000Hz |
| Frequency Response: | 20 - 20.000Hz ± 2 dB |
| Tracking Ability At 315Hz: | 70 µm |
| Compliance, Dynamic, Lateral: | 8 µm/mN |
| Stylus Type: | Nude Elliptical |
| Stylus Tip Radius: | r/R 8/18 µm |
| Tracking Force Range: | 2,5-3,5 g (25-35 mN) |
| Recommended Tracking Force: | 3,0 g (30 mN) |
| Tracking Angle: | 20° |
| Internal Impedance, DC Resistance: | 2 Ohm |
| Recommended Load Impedance: | 10 - 50 Ohm |
| Cartridge Body Material: | Grinded Wood |
| Coilwire Material: | Goldplated Silver |
| Cartridge Colour: | Shiny Black |
| Cartridge Weight: | 30 g |
.jpg)
