Manufacturer
Canor PH 1.10 Tube Phonostage
Zoom  Zoom
Canor PH 1.10 Tube PhonostageCanor PH 1.10 Tube PhonostageCanor PH 1.10 Tube Phonostage

Canor PH 1.10 Tube Phonostage

£4,850.00    
£4,041.67 Exc. VAT |  |

Canor PH 1.10 Tube Phonostage

CANOR PH 1.10 is an all-tube turntable preamplifier for both MM and MC phono cartridges.

TUBES

Nine tubes, one vacuum tube out of them used to rectify anode voltage. Absolute selection and tubes matching with above-average parameters.
 
PREMIUM TECHNOLOGY
 
Wiring circuitry without any global feedback. PCB`s utilize our premium CMT ™ technology.

PHONO CARTRIDGE

A high-quality step-up Lundahl transformer for MC phono cartridges. If a turntable is fitted with two tonearms, one having MM phono cartridge installed and the other MC, both can be connected simultaneously without mutually affecting each other. Hight variability of gain settings, resistances and capacitances settings for all types of phono cartridges.

TRANSFORMER

Vacuum-impregnated transformer core. Transformer potted in a special anti-vibration compound.

CAPACITORS

We only use high-quality polypropylene capacitors in the signal path.
 
MM 50, 150, 270, 370, 520, 620, 740 and 840 pF / Gain: 46 dB
MC1 10, 20, 40, 80, 150, 300, 600 and 1200 Ohm / Gain: 70 dB
MC2 2, 5, 10, 20, 40, 80, 150 and 300 Ohm / Gain: 76 dB
Output impedance 100 Ohm
Inputs RCA – MM / RCA – MC
Outputs RCA / XLR
Total Harmonic Distortion MM/MC
Subsonic Filter 18 dB / Octave
RIAA accuracy 0,3 dB / 20 Hz – 20 kHz
Signal-To-Noise ratio MM 72 dBV (87 dBV – IEC -A)
Signal-To-Noise ratio MC 68 dBV (82 dBV – IEC -A)
Tube Complement 8x 6922EH, 1x 6CA4EH
Power 230 V / 50 Hz / 70 VA
Dimensions (w x h x d) 435 x 170 x 485 mm
Weight (net) 17 kg

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction