AVID Diva II Turntable - Ex Demonstration
Good condition, some marks on control box case and arm mounting plate where various armboards have been fitted over time. Cork platter top is sun bleached so a different shade to underneath where the clamp screws on. Obviously this is not seen in use. Damage is shown in photographs.
Comes with RB303 tonearm, no cartridge
"Not so entry level"
Despite being AVID's entry level model, The AVID Diva II shares the design philosophy and key elements of AVID's more expensive designs. Mechanical energy transmission away from the record, high torque motors and isolation is AVID's philosophy combined with high standards of engineering and design.
The foundation of the Diva II is the same ultra rigid, one piece aluminum casting used for our other models. The arm and platter are mounted to this using the same sapphire bearing and clamping system as our other turntables. The vibration caused by the cartridge during replay is effectively channeled to this main chassis. Platter construction is MDF with the same mat as the Volvere and Sequel models, ensuring an impedance miss-match with the record and with the aid of the clamp reduces energy entering the platter avoiding sound colorations.
"Exceptional resolution"
Isolating the main chassis is critical to ensure low coloration and here AVID employs a triple elastomer layer system using a uniquely tailored sorbathane compound giving optimum mechanical isolation of the playing surface, resulting in better information retrieval and resolution. The external power supply feeds a powerful motor to give excellent speed stability and dynamic sound.
Beautifully finished with minimalist styling, a timeless piece of engineering excellence and design within the reach of everyone.
"In many ways, the Diva II struck me as sounding like a 'mini-Volvere' and, at a quarter of the price of its bigger brother, but with far more than a quarter of the performance, it deserves a hearty recommendation! Stylish, superbly built turntable that turns in an emotive and highly musical performance. Solid, tuneful bass-fine image depth - smooth, detailed top end - build quality, styling."
-Adam Smith, Hi-Fi World
Specifications:
Drive | : Belt drive |
Speeds | : 33.3 and 45.0 RPM |
Platter mass | : 2.5 Kg |
Bearing | : Inverted stainless steel |
Thrust point | : Tungsten carbide/Sapphire |
Suspension | : Triple layer 3 point elastomer |
Tonearms | : Std. cut for SME (adapters to order) |
Motor | : 24v 12mNm ac synchronous |
Power supply | : Separate control unit |
Voltage input | : 100-240vac 50/60Hz 20 watts max. (depending on region) |
Dimensions | : Turntable (overall) 450mm x 390mm x 140mm (WxDxH) |
| : Turntable (footprint) 380mm x 340mm (WxD) |
| : P.S.U. 158mm x 160mm x 60mm (WxDxH) |
Net weight | : 9.0Kg (20lb) ex. PSU |
Packaging | : 570mm x 530mm x 230mm (WxDxH) |
Shipping weight | : 14.0Kg (31lb) |